Page 7
For technical questions, please call 1‑800‑444‑3353.
SKU 67802
Memory
Note:
Memory can be used for
distance, area, or volume
measurements.
1. Press
MEM INPUT
to store
displayed Total Result in memory.
If only a Current Result is
displayed, it will be stored instead.
MEM
will appear on Display.
2. Press
MEM RECALL
later to
display stored memory and clear it.
MEM
will disappear from Display.
3.
MEM RECALL
can be used in
steps 1 or 3
of
“Addition”
instead
of taking new measurements.
Area/Volume
Calculation
Note:
Area/volume calculation
cannot be exited before
calculation is complete.
1. Press
button to enter
area calculation mode or
press
button to enter
volume calculation mode.
2. The
L
will blink.
Take measurement for
length as explained under
“Distance Measurement”
.
3. Then, the
W
will blink.
Take measurement for
width as explained under
“Distance Measurement”
.
4.
For area calculation,
the
H
will blink. Take measurement
for height as explained under
“Distance Measurement”
.
5. The area/volume is displayed
as Total Result at the
bottom of the display.
6. The Current Result will display
the last measurement taken.
Press
READ
briefly to cycle
through the measurements taken.
7. Press
or
button to take
another area or volume calculation.
8. Press and hold
READ
button
for a few seconds to exit
area/volume calculation.
