SKU 93295/93294 For technical questions please call 1-800-444-3353. Page 2
Safety Warnings and Precautions
WARNING: When using product, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Observe work area conditions. Keep work area well lighted. Always keep
children our of work area.
3.
Store idle equipment. When not in use, the Indicator must be stored in a dry
location. Always lock up products and keep out of reach of children.
4.
Use the right product for the job. There are certain applications for which the
Indicator was designed. Do not modify the Indicator and do not use the Indicator
for a purpose for which it was not intended.
5.
Check for damaged parts. Before using any product, any part that appears
damaged should be carefully checked to determine that it will operate properly
and perform its intended function. Check for any broken or damaged parts and
any other conditions that may affect its operation. Repair damaged or worn
parts immediately.
6.
Do not operate product if under the influence of alcohol or drugs. Read
warning labels on prescriptions to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the product.
7.
Use eye protection. Always wear ANSI approved impact safety goggles.
8.
Battery strength will affect readings. Use fresh battery at all times.
Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It must
be understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
Operation
Your Digital Indicator requires no assembly. It is important that you read the
entire manual to become familiar with the product BEFORE you use the Digital
Indicator.
Do not bump or shock the tool when applying it to any work piece. Rough
treatment may damage the highly sensitive mechanism.
Note: There are many applications for the Digital Indicator. On the following page
is one example of how this product can be used: testing brake rotors for true. Make
certain to clean off all brake components with brake parts cleaner before testing.
Unpacking
When unpacking your Digital Indicator, check to make sure that the product is
intact and undamaged. If any parts are missing or broken, please call
HARBOR FREIGHT TOOLS at 1-800-444-3353.
Brought to You by www.snapwhole.com
