Page 4
For technical questions, please call 1-888-866-5797.
Item 63273
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
Note:
For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
Note:
This air tool may be shipped with a protective plug covering the air inlet. Remove this plug before set up.
Assembly
1. Attach Adapter Holder (40) to the Lower Handle (18)
with two U-Bolts (39) and Nuts (23).
Refer to Figure A.
Saddle
Adapters
(41– 43)
U-Bolts
(39)
Nuts (23)
Adapter
Holder
(40)
R-Pin (44)
Lower
Handle
(18)
Figure A
2. Tighten Nuts to secure Adapter Holder to Handle.
3. Put height adjustment Saddle Adapters (41– 43)
into the Adapter Holder (40) and lock each
with an R-Pin (44). Refer to Figure A.
5. Put the Handle Assembly into Handle Socket
and secure with Bolt (6). Refer to Figure B.
Bolt (6)
Handle Assembly
Figure B
