Page 7
For technical questions, please call 1-888-866-5797.
Item 62590
SAFET
y
Op
ERA
TION
M
AINTENAN
c
E
SETU
p
Maintenance and Servicing
procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO pREVENT SERIOUS INJURy FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration
occurs, have the problem corrected before further use.
cleaning, Maintenance, and Lubrication
1.
BEFORE EAcH USE,
inspect the general
condition of the Jack. Check for:
• loose or missing hardware
• misalignment or binding of moving parts
• cracked or broken parts
• any condition that may affect its safe operation.
If a problem occurs, have the problem corrected
before further use.
Do not use damaged equipment.
2.
BEFORE EAcH USE,
thoroughly test the Jack
for proper operation prior to its actual use.
If the Jack appears not to be working properly,
follow Bleeding instructions on page 5.
3.
AT LEAST ONcE EVERy THREE
yEARS,
change the hydraulic fluid:
a. With the Jack fully lowered, remove the
Fluid Fill Plug on the side of the Housing.
b. Tip the Jack to allow the old hydraulic fluid
to drain out of the Housing completely,
and dispose of the old hydraulic fluid in
accordance with local regulations.
c. With the Jack upright, completely fill the Housing
with a high quality hydraulic fluid (not included)
until the fluid is 1/4″ below the fill hole.
d. Open the valve by turning the Handle
counterclockwise and pump the Handle
to bleed air from the system.
e. Recheck fluid level and re-fill as needed.
f. Reinstall the Fluid Fill Plug.
4.
AFTER EAcH USE,
wipe dry with a clean cloth.
Store the Jack in a safe, dry location out of reach
of children and other non-authorized people.
