Page 2
For technical questions, please call 1-888-866-5797.
61523
SA
FE
TY
OP
ERA
TIO
N
MA
INT
ENANC
E
ASSEM
BL
Y
SA
FE
TY
OP
ERA
TIO
N
MA
INT
ENANC
E
ASSEM
BL
Y
Specifications
Rated Capacity
300 lb
Maximum Lift Height
24"
Axle Width
36"
–
50.5"
Patent Pending
IMPORTANT SAFETY INFORMATION
Failure to heed these warnings may result in personal injury and/or property damage:
Assembly Precautions
1. Assemble only according to these instructions.
Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly.
3. Keep assembly area clean and well lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the
influence of alcohol, drugs or medication.
6. Weight capacity and other product capabilities apply
to properly and completely assembled product only.
Use Precautions
1. Study, understand, and follow all instructions before
operating this device.
2. Do not exceed rated capacity.
3. Use only on hard, level surfaces.
4. Center load on Jack platforms.
5. Lift only using tires.
6. Immediately after lifting load, ensure Jack
mechanical load holding means is engaged.
7. Do not move while loaded.
8. Secure load with appropriate restraint device.
9. Do not adjust safety valve.
10. Wear ANSI-approved safety goggles and heavy-duty
work gloves during use.
11. Keep clear of load while lifting and lowering.
12. Lower load slowly.
13. Do not use for aircraft purposes.
14. Inspect before every use; do not use if parts loose or
damaged.
15. Keep your work area clean and well lit. Cluttered
work areas invite accidents.
16. Do not allow anyone on the vehicle while using the
Jack. Keep bystanders a safe distance away from
the vehicle and Jack.
17. Stay alert. Watch what you are doing, and use
common sense when operating a Jack. Do not use
a Jack while tired or under the influence of drugs,
alcohol, or medication. A moment of inattention while
operating Jacks may result in serious personal injury.
18. Store idle Jacks out of reach of children
and other untrained persons. Jacks are
dangerous in the hands of untrained users.
19. Jack service must be performed only by qualified
repair personnel. Service or maintenance performed
by unqualified personnel could result in a risk of injury.
20. When servicing a jack, use only identical
replacement parts. Follow instructions in the
“Maintenance and Servicing” section of this manual.
Use of unauthorized parts or failure to follow
maintenance instructions may create a risk of injury.
21. Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact Harbor Freight Tools for a replacement.
22. Before use, read manufacturer’s instruction manual
for the vehicle you will lift.
23. Do not support both ends of the vehicle at the same
time.
24. Before lowering the Jack, remove all tools and
equipment from under the vehicle.
25. The warnings, precautions, and instructions
discussed in this manual cannot cover all
possible conditions and situations that may occur.
The operator must understand that common sense
and caution are factors, which cannot be built into
this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS.
