Page 5
For technical questions, please call 1-888-866-5797.
Item 58920
10. Pull down on both handles until
the bead slides off the rim.
11. Remove mounting components and
flip the tire up, forcing it off the rim.
12. Remove Pin and Forcing Handle
from the Locking Nut.
13. Lubricate each bead with tire mounting
lubricant (sold separately) to facilitate
sliding of the bead over the rim and
reduce the risk of tire damage.
14. Push down on tire until there is
enough room to place the ball end
of the Mounting/Demounting Tool (7)
under the bead on the opposite
end of the tire. See Figure E.
Mounting/Demounting Tool
Figure E
15. Push Mounting/Demounting Tool’s
handle down, raising the bead
above the rim. See Figure F.
16. With ball end still under the bead, pull
handle of Mounting/Demounting Tool
around clockwise. Hold tire to prevent
it from turning. See Figure F.
17. Raise tire so that lower bead is just
under the upper lip of the rim.
See Figure F.
Mounting/Demounting Tool
Clockwise rotation
Figure F
18. Position the ball end of
Mounting/Demounting Tool
under lower bead of tire.
19. Push down on handle to push
lower bead above the rim.
20. Pull Mounting/Demounting Tool’s
handle clockwise to remove
bottom bead from the rim.
