Page 4
For technical questions, please call 1-888-866-5797.
58769
footwear are recommended when
working. Wear restrictive hair
covering to contain long hair.
7.
Use eye and ear protection
.
Always wear ANSI approved
impact safety goggles when
working. Wear a full face shield if
you are producing metal filings.
Wear an ANSI approved dust mask
or respirator when working around
metal, wood, and chemical dusts
and mists.
8.
Do not overreach
. Keep proper
footing and balance at all times. Do
not reach over or across running
machines.
9.
Maintain tools with care
. Keep
tools maintained and clean for
better and safer performance.
Follow instructions for lubricating
and changing accessories. The
handle must be kept clean, dry,
and free from oil and grease at all
times.
10.
Stay alert
. Watch what you are
doing, use common sense. Do
not operate any tool when you are
tired.
11.
Check for damaged parts
.
Before using any tool, any part
that appears damaged should be
carefully checked to determine
that it will operate properly and
perform its intended function.
Check for alignment and binding
of moving parts; any broken parts
or mounting fixtures; and any
other condition that may affect
proper operation. Any part that
is damaged should be properly
repaired or replaced by a qualified
technician.
12.
Replacement parts and
accessories
. When servicing, use
only identical replacement parts.
Use of any other parts will void the
warranty. Only use accessories
intended for use with this tool.
Approved accessories are available
from Harbor Freight Tools.
13.
Do not operate tool if under
the influence of alcohol or
drugs
. Read warning labels on
prescriptions to determine if your
judgment or reflexes are impaired
while taking drugs. If there is any
doubt, do not operate the tool.
