Expression Through a Multiple
This patch adds a second effects module and a split expression pedal control signal to the
basic “Patching a Module” patch. The multiple section of the Patch Box patch panel is
used to split a signal in two. This patch uses the multiple to allow an expression pedal to
control two parameters at the same time.
A second effects module is patched between the output of the Filter and the
OUT jack of
the Patch Box. We have used a Pittsburgh Modular Crush, an analog downsampling, signal
crushing module. The EXP1 output is patched into the Multiple. A second patch cable is
patched from the Multiple into the Frequency CV input of the Filter. The third output of the
Multiple is patched into the Sample Rate CV input of the Crush module.
This patch does not utilize the footswitches.
14
