Filter Module (continued)
Switch It Up (continued)
Mode switches between Filter and Oscillator modes. Set to "Filter", the Pittsburgh Modular Filter will not self oscillate. Set to
"Oscillator" the Filter produces a high quality voltage controlled sine wave. Adjusting the Q while in Oscillator mode
modifies
the shape of the waveform. At more extreme settings the Q adds anything from warm fuzz to heavy distortion to the incoming
audio.
Controls
Q Control –
Adjusts the resonance (Q) of the filter.
FREQ Control –
Adjusts the Frequency of the filter.
L-H Control –
Sweeps between lowpass, notch, and highpass filters.
QCV Control and Input –
Resonance (Q) control voltage input and attenuverter.
FCV Control and Input – Frequency control voltage input and attenuverter.
1-Q Switch –
Switch between Gain to 1 (VCA Mode) and Gain of Q (Standard Mode).
F-O Switch –
Switch between Filter and Oscillator Modes.
LOW Output –
Lowpass Output.
L-H Output –
Output based off of the L-H Pot.
HI Output –
Highpass Output.
BND Output – Bandpass Output.
16
