Pittsburgh Modular foundation 2.0, Manual And Patch Manual

Page: 10 / 44

Oscillator Module(x2)
Description:
A wide range, multiple waveform generator. The Oscillator has a frequency range starting as low as 7 seconds per
cycle, allowing it to double as a voltage controlled LFO.
Controls:
Big Knob – Course frequency setting.
Fine Knob -­‐ Fine tune frequency setting. This control is calibrated to a range of 1 octave.
1V Input -­‐ CV input used to track the Oscillator at 1 volt per octave.
RT -­‐ CV Input used to hard reset the Oscillator on the falling edge of the incoming waveform.
FM Knob and Input -­‐ Linear frequency modulation CV input attenuator and input.
PW Input -­‐ Pulse width modulation CV input. Affects the pulse width of the square wave
PW Knob -­‐ Manually controls the pulse width of the square wave.
SIN Output – Sine wave output
TRI Output – Triangle wave output
SAW Output – Saw wave output
SQR Output – Square wave output
10