Analog Delay Control Descriptions
Rate Control Knob / Rate CV Input:
The Rate control knob adjusts the delay time of the Analog Delay module. Left is
a shorter delay and right is a longer delay. Delay time is controlled internally by a
VCA. The Rate control knob controls the delay time by producing a 0-5v control
voltage that controls the rate VCA.
The Rate CV Input accepts 0-5v signals. The incoming voltage is added to the
voltage produced by the Rate control knob to determine the delay time.
Bypass Switch:
A true bypass switch to enable or disable the analog delay effect.
Feedback Control Knob / Feedback CV Input:
The Feedback control knob adjusts the number of repeats in the wet signal. Left
is fewer repeats and right is more repeats. Feedback is controlled internally by a
VCA. The Feedback attenuator knob controls the amount of repeats by
producing a 0-5v control voltage to to controls the feedback VCA.
The Feedback CV Input accepts 0-5v signals. The incoming voltage is added to
the voltage produced by the Feedback control knob to determine the number of
repeats.
Wet Control Knob / Wet CV Input:
The Wet control knob attenuates the wet signal available to the Feedback output
and Mix output. The amount of wet signal available to the outputs is controlled
internally by a VCA. The Wet attenuator knob controls the level of wet output by
producing a 0-5v control voltage to to controls the wet VCA.
The Wet CV Input accepts 0-5v signals. The incoming voltage is added to the
voltage produced by the Wet attenuator knob to determine the amount of wet
signal available to the outputs
Dry Control Knob:
The Dry control knob attenuates the dry signal available to the Mix output.
Pittsburgh Modular Analog Delay Manual
!
3
