Page 2
For technical questions, please call 1-888-866-5797.
Item 63391
Specifications
Gauge Range
0-30 In. of mercury (inHg)
0-760 torr
Important Safety Information
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow instructions listed below may result in serious injury.
SAVE THESE INSTRUCTIONS
1.
Keep bystanders, children, and
visitors away while operating the
Vacuum Pump.
Distractions can
cause you to lose control. Protect
others in the work area from injury.
2.
Stay alert. Watch what you are
doing, and use common sense
when operating the Vacuum Pump.
Do not use the tool while tired
or under the influence of drugs,
alcohol, or medication.
A moment
of inattention while operating the tool
may result in serious personal injury.
3.
Dress properly. Do not wear loose
clothing or jewelry. Contain long
hair. Keep your hair, clothing, and
jewelry away from moving parts.
Loose clothes, jewelry, or long hair
can be caught in moving parts.
4.
Do not overreach. Keep proper
footing and balance at all times.
Proper footing and balance
enables better control of the tool
in unexpected situations.
5.
Use safety equipment.
Wear ANSI-approved safety glasses
underneath a full face safety shield.
Nonskid safety shoes, hard hat, or
hearing protection must be used
for appropriate conditions.
6.
Do not force the tool. Use the
correct tool for your application.
The
correct tool will do the job better and
safer at the rate for which it is designed.
7.
Store idle tools out of reach of
children and other untrained
persons.
Tools are dangerous in
the hands of untrained users.
8.
Maintain tools with care. Keep
tools dry and clean.
Properly
maintained tools are less likely to
bind and are easier to control. Do not
use a damaged tool. Tag damaged
tools “Do not use” until repaired.
9.
Check for misalignment or binding
of moving parts, breakage of
parts, and any other condition that
may affect the tool’s operation.
If damaged, have the tool serviced
before using.
Many accidents are
caused by poorly maintained tools.
10.
Use only accessories that are
recommended by the manufacturer
for your model.
Accessories that may
be suitable for one tool may become
hazardous when used on another tool.
