Page 3
For technical questions, please call 1-800-444-3353.
Item 61232
Setup
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY:
Remove load from the jack before any procedure on this page.
Note:
For additional information regarding the parts listed in the following
For additional information regarding the parts listed in the following pages,
refer to
Parts List and Diagram
on page 7.
1. Locate set of four Casters (2),
four M12 Nuts (4) and four M12 Washers (3).
2. Insert a Caster in each opening in Base (1).
3. Place a Washer (3) and Nut (4) over the
threaded end of each Caster Assembly.
Tighten securely.
See Figure A.
M12 Nut (4)
Washer (3)
Washer (3)
Caster (2)
Caster (2)
Figure A: Caster Assembly
Summary of Contents for 61232
Page 1: ......
