background image

Solar Designer User Guide 28961 V0513

P.O. Box 1708 • Pittsburg, KS 66762

www.pitsco.com

Toll-Free Orders 800-835-0686

11. Your solar car is now complete. If your car runs backward, switch the 

black and red wires on the motor.

Note: The car will run on a smooth surface in full sunlight or under an 
incandescent 100-watt lightbulb. Fluorescent light will not produce 
enough energy to move the car.

Solar Engineering Ideas

•   Modify the car using different gears or combinations of gears to 

increase the speed or power of the vehicle.

•   Add more solar panels (available at shop.pitsco.com) in series to 

increase the voltage (and speed) or in parallel to increase power 
(Figure 5).

•   Add more motors, solar panels, or plastic bodies to create a four-

wheel-drive solar vehicle.

•   Convert a toy car to run on a solar cell.
•   Build a windmill from dowel rods and craft sticks.
•   Have a contest for speed and/or power with other solar engineers 

in your school.

Series:

1.35 V, 400 mA

Parallel:

.45 V, 1.2 Amps

Figure 5

Summary of Contents for Solar Designer

Page 1: ...nderstood the instructions provided in this user guide Read warnings on packaging and in manual carefully Always exercise caution when using sharp or powered tools About the Kit With this kit you can build a solar powered car and other solar energy projects using the parts and instructions Follow these instructions to build a solar car Then be inventive and design your own project User Guide ...

Page 2: ...easier to push the axles into the wheels 2 Using a drill or drill press with a 9 64 bit drill two holes in the plastic body as shown in Figure 1 Hole A should be drilled 1 3 4 from the back of the body under the motor slot and 1 2 from the top of the body opposite of the grooved side Drill through all four plastic surfaces keeping the drill bit parallel to the top and perpendicular to the side 3 H...

Page 3: ... free end of the axle and insert the axle through Hole B in the plastic body Slide the remaining brass washer onto the end of the axle and push the other front wheel onto the axle Make sure the wheels turn freely Figure 1 8 Connect the solar panel wires to the motor by clipping the alligator clips onto the motor terminals Figure 3 9 Lay the motor in the slot in the top of the body so the gears fro...

Page 4: ...car Solar Engineering Ideas Modify the car using different gears or combinations of gears to increase the speed or power of the vehicle Add more solar panels available at shop pitsco com in series to increase the voltage and speed or in parallel to increase power Figure 5 Add more motors solar panels or plastic bodies to create a four wheel drive solar vehicle Convert a toy car to run on a solar c...

Reviews:

Related manuals for Solar Designer