10
© 2022 Pitsco Education, LLC. All rights reserved.
4. Power on the remote. The remote will beep once.
5. To pair, push the left joystick fully upward until you hear a beep and then fully
downward until you hear a second beep. The indicator lights on the drone will change
from blink to solid indicating a successful pair.
6. Press the Takeoff/Land button to start flight. The motors will begin spinning and the
drone will rise one meter above the surface and hover.
7. Use the left and right joysticks to control the flight.
8. Flight time is approximately six to seven minutes depending on weight of drone.
9. Drone lights will blink to indicate low battery.
10. Drone will land automatically when battery is depleted, or press the Takeoff/Land
button to land the drone.
11. Have a safe flight!
Pairing the Remote and Taking Flight
Follow these steps to pair your remote and fly it. Remember to wear safety glasses when
operating the drone.
1. After the drone is built, make sure the battery is fully charged before flying. Then,
insert the battery into the drone body.
2. After the battery is in place, press and hold the power button on the bottom of the
drone to power up the drone. The LED lights on the bottom will flash when the drone
is powered up.
3. Turn on the drone and place it on a level surface. The drone indicator lights will blink
slowly, which indicates it is waiting for pairing.
Takeoff/Land
Pairing
DRONE FLIGHT
DRONE FLIGHT
Summary of Contents for DRONE MAKER
Page 1: ...92140...
