P.O. Box 1708 • Pittsburg, KS 66762
www.pitsco.com
Toll-Free Orders 800-835-0686
Attaching Blades to the Hub
1. Push a blade into the prop hub until the bottom of the blade is flush with the center (Figure 9). Place a
6-32 3/4" screw on each side of the blade.
Note:
When you are placing blades into the prop hub, two
screws must be used to fully secure the blade.
2. Repeat Step 1 to add the other blades (Figure 10).
Figure 9
Figure 10
