Pitney Bowes SendPro C series, Operator'S Manual

Page: 37 / 232

Creating a trackable label
1. Tap Trackable Labels on the Home screen. The Carrier screen opens.
2. Tap the carrier you want to use. For example, tap UPS.
3. If this is the sender you want to use, tap Continue .
l
If you want to use a different sender, tap Sender . Tap on a new sender, then tap Continue .
4. You can manually enter a recipient, or select one from the Address book. To select one from the
address book, tap the Address icon in the upper right corner of the screen.
5. Tap Continue .
6. If you have enabled cost accounts on your device, a Cost Account field is provided. Tap on the field
to open the Cost Account screen and select an account.
7. Tap the kind of packaging you are using. For example, My Box or Envelope .
8. First, tap each dimension and enter a value using the keypad on the display. Tap the check mark
when done.
9. If you have an attached scale, place the box or envelope on the scale and the weight appears in
the weight field. If you do not have a scale, tap Weight and enter the value.
10. Tap Continue .
11. Tap the service you want to use. For example tap UPS Ground .
12. Tap Print .
13. At the Label Options screen, tap Format and select the printer format. For example, tap Roll - 4 x
6 .
14. If you want to print a sample label first, tap the Print Sample button.
15. Tap Print again and the label prints.
l
If prompted to enter the Sender and Recipient's phone number (required for some services).
16. The carrier screen reappears. You can now print another label.
To reprint a label, refer to Reprinting a USPS, UPS or FedEx trackable label.
To cancel a UPS or FedEx label, refer to Canceling a UPS or FedEx trackable label.
To get a USPS refund, refer to Getting a USPS refund .
Using Trackable Labels
Pitney Bowes Operator Guide June 2018 37