Pitney Bowes SendPro C series Operator'S Manual Download Page 189

Page: 189 / 232

The screen is on but the power light is off

Issue

If the screen is on but the power light is off, or the screen is on but the power light turns off while the meter
is starting up.

Cause

Indicates that the screen has not shut down properly.

Solution

The screen must shut down before normal operation can be restored:

1. Unplug the meter.

2. Leave the display on until the internal battery dies (5 - 6 hours).

3. Plug the meter back in.

4. Wait one hour for the battery to charge.

5. Press the power button to turn the meter on.

Note

: When shutting down the meter, wait for the 10-second timer to complete before you tap anywhere

on the screen.

Troubleshooting

Pitney Bowes

Operator Guide

June 2018

189

Summary of Contents for SendPro C series









































































































































































































































Search results

Summary of Contents for SendPro C series

Reviews:

Related manuals for SendPro C series

Brands by name

Popular brands

Pitney Bowes SendPro C series, Operator'S Manual

Search results

Summary of Contents for SendPro C series

Reviews:

Related manuals for SendPro C series

Brands by name

Popular brands