Introduction
This is a reference document to help you prepare for your SendPro 300 installation. Review these
requirements and guidelines before installing the product. If you have extensive network security
restrictions at your site, you may need assistance from your IT or network specialist. In this case, refer to
the
Advanced Installation Requirements
section of this document for more information.
Basic Installation Requirements
You can connect your meter to the internet via your network (LAN) connection. This provides a quick and
reliable connection that is always available when your postage meter connects to Pitney Bowes for
services such as postage refills, rate changes, system updates and postal inspection.
In most cases, you connect your meter as described in the instructions included in the box. This results in
a reliable and secure connection.
(Refer to the Installation Setup Instructions included in the box.)
Power Outlet Requirements
The standard system requires a minimum of two electric outlets and up to four electric outlets depending
on options purchased.
l
Meter – two electric outlets
l
Meter and Label Printer – three electric outlets
l
Meter, Label Printer and Wi-Fi Device – four electric outlets
Network Requirements
Access to the internet is required. The basic system comes with a network cable that you can plug into a
network plug with internet access.
Note:
You may choose to purchase an option that includes a network connection via a Wi-Fi connectivity
device. Refer to the
Wi-FI Connectivity Specifications
section in this document for more details.
Pitney Bowes
Installation Requirements
March, 2017
Page 2 of 7
