Pitney Bowes Relay 2500 User Manual Download

Page: 57 / 182

Setting the Main Sheet Feeder

The main sheet feeder is automatically selected depending on the fold type you selected.

C- fold and double-fold

- Sheet Feeder 1 is set as the main sheet feeder

Z-fold and single fold

-Sheet Feeder 2 is set as the main sheet feeder

1. Tap the

and

–

buttons to scroll through the job options.

Icon

Option

Description

Feeder On

Feeder on

Double Detect

Feeder running double detect.

(Double detect stops the inserter

if two or more sheets are fed simultaneously.)

Manual Feed

Manually feeds collated sets; only available on sheet feeder 1.

The inserter waits for manual insertion of each set into sheet

feeder 1, after which it will fold and insert the set automatically.

Linked Feeding

: On

(only

available on Relay 3500 and

4500 models)

Linked feeding on.

(Feed comes from the first sheet feeder and

when empty, automatically switches feeding from the second

sheet feeder.)

NOTE: If there is no feeder icon displayed, the feeder is not active for this job

2. Tap the

button to accept the option and advance to the next setting.

Product Overview

Pitney Bowes

Relay™ 2500, 3500, 4500 User Guide

December, 2018

Page 50 of 174

Summary of Contents for Relay 2500






















































































































































































Search results

Summary of Contents for Relay 2500

Reviews:

Related manuals for Relay 2500

Brands by name

Popular brands

Pitney Bowes Relay 2500, User Manual

Search results

Summary of Contents for Relay 2500

Reviews:

Related manuals for Relay 2500

Brands by name

Popular brands