Clear Material • 4
SV63176 RevB
4-3
Clear Material Jams
1. Remove all paper from the affected feeders that are indicated on the
display.
2. If necessary, clear sheets from the affected feeder.
• If the display indicates a
jam in the
sheet feeder(s)
or manual feeder
areas,
pull the feeder assembly
from the inserter as shown,
and then carefully remove
any stalled material.
• If the display indicates
a jam beneath
cover D
,
press the blue button
marked D to release the
cover. Lift the cover using
the finger grips on each
side of the stacker, and
then carefully remove any
stalled material.
• When closing the cover,
latch it closed by pressing
down on the finger grips
or the central part of
the cover in front of the
envelope feeder. DO NOT
press down on the stacker.
Button D
• If the display indicates
a jam beneath
cover E
,
press the blue button
marked E to release the
cover. Push the cover
backwards to gain full
access, then carefully
remove any stalled
material.
Button E
Summary of Contents for Relay 1000
