Pitney Bowes Epic Manual Download Page 84

Page: 84 / 295

Setting Up the RAT (Right Angle Transfer)

The RAT changes the direction of the envelope 90 degrees to be transported downstream to the output.

Adjusting the Roller Tension

This is the only operator adjustment in the RAT area.

1. Open the engine and sealer top covers.

2. Locate the adjustable roller locking screw for the two exit rollers.

Item Description

Tensioner

Locking Screw

RAT Roller Tension and Locking Screw

3. Using a 3/16" setup tool, loosen the locking screw.

4. With the locking screw loose, adjust the tension of the roller.

(The left side is lighter, press to the

right is more pressure.)

5. Tighten the locking screw.

Operator Adjustments

Pitney Bowes

Epic Select Operator Guide

December, 2017

Page 78 of 288

Summary of Contents for Epic







































































































































































































































































































Search results

Summary of Contents for Epic

Reviews:

Related manuals for Epic

Brands by name

Popular brands

Pitney Bowes Epic, Manual

Search results

Summary of Contents for Epic

Reviews:

Related manuals for Epic

Brands by name

Popular brands