Pitney Bowes EDGE 7.11, Reference Manual

Page: 658 / 896

CV/LAN CV/LAN Setup
Telephony Gateway Reference Manual 658
to the tp2as script file or to the .profile of the user ID who will be
s t a r t i n g t h e C V / L A N s e r v e r . T h e s y n t a x i s t y p i c a l l y
FLUSH_SOCKETS=1; export FLUSH_SOCKETS.
Multiple
tpas_servers
For more than one EDGE installation (for example, a training system
and a production system) to communicate with CV/LAN, multiple
tpas_servers must be started; one to communicate with each EDGE
server.
Note: If using a separate CV/LAN PC for each EDGE server, this setup is
not required.
To implement multiple tpas_servers, perform the following steps:
1. In the EDGE Telephony Device setup for each EDGE installation,
set a unique pair of Input paths/TCP ports and Output paths/
TCP ports .
2. On CV/LAN, copy the tp2as shell script to a new name for each
EDGE it communicates with. The new name should follow the
following pattern:
tp2as suffix
3. On CV/LAN, copy the tpas_server program to a new name cor-
responding with the new tp2as program. The suffix added to