Pitney Bowes EDGE 7.11, Reference Manual

Page: 61 / 896

Setup Device
Telephony Gateway Reference Manual 61
For EIS , set this to 5000 or the output value set on
the EIS system.
For Aspect , this must match the port defined in the
Aspect Data System InterLink Record on the Call-
Center machine. Typically this is defined by an
Aspect administrator. Because only one TCP port is
used, the telephony server establishes a connec-
tion with Aspect before forking the switch server.
For Davox , this is the port used to communicate
between the generic set of telephony servers and
the tpun_server. It is recommended this be set to
8200. This value must match the value set in the
environment variable UN_DEFAULT in tp2un
script. The input and output ports are typically the
same.
For TMI , this is the port used to communicate
between the generic set of telephony servers and
the TMI server.
For AvayaPC, this is the port of the Pro-active Con-
tact server, which is 22700 by default.
This property is not used with the CallPath Gateway.
Output paths/
TCP ports The output TCP port. This port should be defined
in the /etc/services file to prevent conflicts with
other applications. The output port for EDGE is the
input port for the gateway (and vice versa).
Properties: (continued)