2 • Operation
2-2
SV61789 Rev. A
Select a Job
When the machine is turned ON,
the display shows the last job run
and
Tral Pece Requred
.
Press the
Job
button until the
job you want displays, or press
Default
if you want to run the
machine with your standard job
settings.
Note:
Only a Pitney Bowes Service Representative can modify the
default job.
If you have material loaded, press
Trial Piece
. The machine will set
itself and run a test piece for you
to check.
If you don’t have material loaded,
do this now, then return to this
section. You’ll find instructions for loading the machine on pages 2-4
to 2-9.
Note:
You may have selected a manual feed job where sheet feeder 1 is
set for manual feed of collated sets. If this is the case, DO NOT load
the sheet feeder. Instead, you’ll feed collated sets one at a time by
hand as required by the machine.
Before you run a manual feed
job, pull back the lever as shown
at the right. This opens the feed
mechanism for manual feed op-
eration.
Remember to return this lever to
its normal position when you use
the feeder for automatic opera-
tion.
Summary of Contents for DI425 FastPac
