TO THE PURCHASER, OWNER AND STORE MANAGER
Please review these warnings prior to posting them in a prominent location for reference.
ii
L20-418 Rev 2 (5/16)
WARNING
Installation, maintenance and repairs
should be performed by a Pitco
Authorized Service and Parts (ASAP)
company technician or other qualified
personnel. Installation, maintenance or
repairs by an unauthorized and
unqualified personnel will void the
warranty.
WARNING
Installation and all connections must be
made according to local codes in force.
In the absence of local codes in North
America, the installation must conform
with the National Fuel Gas Code, ANSI
Z223.1/NFPA 54 or the Natural Gas and
Propane Installation Code CSA B149.1
as applicable. In Australia, the appliance
must be installed in compliance with
AS/NZS 5601.
WARNING
During the warranty period if a customer
elects to use a non-original part or
modifies an original part purchased from
Pitco and/or its Authorized Service and
Parts (ASAP) companies, this warranty
will be void. In addition, Pitco and its
affiliates will not be liable for any claims,
damages or expenses incurred by the
customer which arises directly or
indirectly, in whole or in part, due to the
installation of any modified part and/or
received from an unauthorized service
center.
WARNING
This appliance, when installed, must be
electrically grounded in accordance with
local codes, or in the absence of local
codes, with the National Electrical Code,
ANSI/NFPA 70, or the Canadian
Electrical Code, CSA C22.2, as
applicable and the hose must comply
with AS/NZS 1869 and be class B or D.
WARNING
Adequate means must be provided to
LIMIT the movement or this appliance
without depending on the gas or
electrical cord connection. Single
appliances with legs must be stabilized
by installing anchor straps. All
appliances equipped with casters must
be stabilized by installing restraining
chains.
WARNING
An appliance equipped with casters and
a flexible gas line must be connected to
the gas supply with a quick disconnect
device. In North America, this quick
disconnect must comply with ANSI
Z24.41. In Australia, the quick
disconnect must comply with AS 4627.
TO THE PURCHASER
Post in a prominent location the
instructions to be followed in the event
that an operator smells gas. Obtain this
information from your local gas
supplier.
FOR YOUR PROTECTION
DO NOT store or use gasoline or other
flammable vapors or liquids in the
vicinity of this or any other equipment.
Do not spray aerosols in the vicinity of
this equipment when it is in operation.
WARNING
Improper installation, adjustment,
operation, alteration, service or
maintenance can cause property
damage, injury or death. Read the
installation, operating and maintenance
instructions thoroughly before
installing, operation, servicing this
equipment.
