manualshive.com logo in svg

PISCO SVA 20A-100, Manual, Page: 27 / 43

Share
Download
PISCO SVA 20A-100 Manual Download Page 27

■ Method for Attaching / Detaching DIN Rail Bracket and DIN Rail

Screw for Manifold-block

(1)

DIN Rail

DRF35S Mounting Screw

(2)

(3)

(1) Fix a solenoid valve on DIN Rail Bracket (DRF35S) by tightening a screw. (*1).

*1 Use a screw with the designated size.

Screw: M4x0.7 (L=62~64)

(2) Mount DIN Rail Bracket (DRF35S) on DIN Rail. Tighten the fixing screw of DIN Rail Bracket (DRF35S) with 
the designated tightening torque in the below table.

■

Table.  Tightening Torque of Fixing Screw

Tightening Torque for Fixing Screw

0.3 ~ 0.4N·m

Max. Load

100N

(3)  Loosen the fixing screw of DRF35S and lean forward the solenoid valve in the way like pulling it up, detach it 

from the rail as following figure shows.

 Safety Instructions for DIN Rail Mounting Bracket

1. Fixing shall be tightened within the designated tightening torque.
2. Do not place anything which exceeds the maximum load on DIN Rail and Bracket.
3. Do not place DIN rail on a place with extreme vibration (9.8m/s

2

or less).

http:/

http://www.

/www.

pisco

pisco.co

m

Summary of Contents for SVA 20A-100












































Reviews:

No comments