PISCO RVV Series, Manual, Page: 5 / 22

■ How to insert and disconnect
1. How to insert and disconnect tubes (Push-In Fitting)
①
Tube insertion
Insert a tube into Push-In Fitting up to the tube end. Lock-claws bite the tube
and fix it automatically, then the elastic sleeve seals around the tube.
Refer to
“
2. Instructions for Tube Insertion
”
under
“
Common Safety Instructions
for Fittings
”
.
②
Tube disconnection
The tube is disconnected by pushing release-ring to release Lock-claws.
Make sure to stop air supply before the tube disconnection.
2. How to tighten thread
①
Tightening thread
Tighten the hexagonal-column with a proper tool within the tightening
torque range 12-14Nm.
Refer to the dimensional drawings for detail.
3. How to fix body with bracket
①
Tightening screw
Use 2 holes on bracket to fix the body with M6 screws. Refer to the
dimensional drawings of the hole pitch.
http:/ http://www. /www.
pisco pisco.co m