Piristeel pisko SAFEGRIP Instructions Manual Download Page 5

MAINTENANCE

When installed in accordance with the instructions, the Pisko ladder and roof safety products are durable and 

safe to use due to the continuous quality control and research work conducted by Piristeel Oy.

In order to ensure the safe use and durability of the products, the property owner must perform the annual 

inspection and maintenance procedures and ensure that the snow load stipulated in the regulations is not 

exceeded.

If a vertical profile has been installed in the ladder, the owner of the property must have it checked annually 

by a person authorized by the manufacturer.

•  inspecting the tightness of the joints and fastening points

•  checking the wall and roof fastenings 

•  checking the watertightness of the lead-ins in the roof 

•  taking care of the removal of excess snow in order to minimize the loading of the structures and 

   fastening points (several times during the winter, if necessary) 

•  removing snow and ice from the ladder, if necessary 

•  checking the condition of the paint or zinc coating of the products, as well as repairing and touch-up 

   painting local damages 

•  replacing or repairing damaged or defective parts as soon as possible.

The annual inspection and maintenance of the Pisko ladder and roof safety products include

Summary of Contents for pisko SAFEGRIP







Reviews: