PIRASTRO KorfkerCradle Series, Quick Start Manual, Page: 12 / 36

lining up the hooked feet
to ensure both hooked feet line up exactly along the edge
of the violin, slightly loosen their torx screws. carefully
press the hooked feet onto the violin and align them with
the outline of the violin. tighten their torx screws carefully.
it may be necessary to readjust the ball feet afterwards to
ensure a perfect fit for the cradle.
adjusting the ball feet
carefully loosen the torx screws of the ball feet so they
can easily be moved. With the violin upturned on your lap,
place the hooked feet around the lower edge of the violin
and the ball feet just beyond the corners of the violin.
check that the cradle is symmetrically positioned on the
violin.
hold one side of the cradle in place by the hooked foot
and the ball foot. slide the leather disc of the ball foot
towards the edge of the violin until they touch. slightly
squeeze the ball foot while tightening its torx screw.
repeat this for the other side. the cradle should now
be firmly attached to the violin.
instruction Manual
1 EN