Page 14 of 17
9.1 Cleaning Filters
Important Note
– the Filters must be cleaned regularly for best suction
performance and to prevent over-heating and damage to your vacuum
cleaner.
Cleaning is best done at the same time when emptying the dust Canister
after you have finish vacuuming for the day.
NOTE
: Never use the vacuum cleaner with wet or damp filters or without
ALL filters fitted.
Using wet or damp filters will damage the filters, may cause serious
damage to the vacuum cleaner and will void your warranty.
9.1.1 Mesh Filter
Remove the Mesh Filter from the Dust Canister as described previously.
Wash the mesh filter in warm mild soapy water, rinse in clean fresh cold
water and let completely dry.
DO NOT
scrub the filters or place in a dishwasher.
DO NOT
use a hair drier to dry the filters.
9.1.2 White Filter
Note
: Only clean the white filter if it is very dirty, otherwise just tap the
edge of the filter on a hard surface to dislodge any dust and remove any
large debris.
If washing, wash the white filter in warm mild soapy water, rinse in clean
fresh cold water and let completely dry.
DO NOT
scrub the filters or place in a dishwasher.
DO NOT
use a hair drier to dry the filters.
Refit the Filters (or replace with new ones) in the reverse method used
for disassembly.
