Page 15 of 16
14.2 Cleaning the Vacuum Cleaner and Components
Do not clean the vacuum cleaner, components or accessories using
petrol or any other flammable liquid or solvents, etc.
Clean only the outside of the vacuum cleaner.
Use only a moist cloth and mild detergent for cleaning the vacuum
cleaner, components and accessories.
After cleaning, wipe off the moisture on vacuum cleaner, components
and accessories with a dry cloth.
Do Not
place accessories and components in a dishwasher.
15 Troubleshooting
Noisy operation
Clean the Filters and empty the Dust Canister
Suction Not Strong
Clean the Filters and empty the Dust Canister.
Check for blockages and unblock
Check that the Suction Relief Valve on the hose handle is
closed.
Check that the Motor speed control knob is set to Max
suction Power
Over-heating / Stopping
Clean the Filters, empty the Dust Canister, check for
blockages and unblock then allow it to cool for up to hour
before trying to restart.
Floor Brush hard to push
Due to the strong suction of your vacuum cleaner, it may be
difficult to push, especially over thick carpet. Rather than
force the Floor Brush, lift the Floor Brush momentarily to
allow air to flow into the vacuum releasing the built up
suction pressure, then continue vacuuming.
Slide open the vacuum Suction Relief Valve located on the
hose handle. This will reduce suction to the floor head.
Adjust the Motor speed control knob to a lower power level
