MAINTENANCE
Always remove the plug from the power socket before performing any
maintenance.
Cleaning the Dust Container
1. Remove the flexible hose from the hose socket and unplug
the adapter for the motorised floor brush.
2. Press the dust container release button and pull the
container out of the vacuum.
3. Hold container over a rubbish disposal bin then press
button to open the base of the container and dispose of
contents.
4. Close the container and replace in the housing.
Maintaining Filters
It is very important to keep the filters clean to receive maximum
performance from the vacuum. Not cleaning not replacing your filters
regularly can reduce the suction power and cause overheating.
5. To clean the HEPA filter and mesh filter,
remove the dust container from its housing.
Press the spring clip to Release the HEPA
filter as shown and pull the filter out.
6. The HEPA filter can be cleaned by brushing
the dust off, washed under running water
or by soaking in warm soapy water.
7. It is important that the HEPA filter has dried
thoroughly before refitting for use.
8. To clean the exhaust filter, detach the back
grill by pressing on the release clip and
pulling firmly away from the appliance.
Remove the filter and wash under running
water and allow to dry completely before
refitting it in the vacuum for use.
9. Filters should be replaced approximately
every 4-6 months depending on how
frequently the appliance is used.
10. Filters can be purchased direct from the
distributor. Call the customer service centre
on 1800 079 124 for details.
Press the dust
release button
Release Clip
