9
Model B+ Assembly Instructions
14)
Ensuring that the USB lead remains in place, align the tabs of the back plastics in the slots on
the side plastics.
15)
Align the tabs of the front plastics in the slots on the side plastics.
16)
Slide the knurled strain relief of the PSA Cable from the back of the unit into the right hand
toothed slot in the back plastics, as shown in
Figure 9
. Press the PSA Cable forward until it is
firmly trapped.
Figure 9
17)
Move the printer and top plastics to the other side of the assembly. This will prevent the
earth strap getting trapped during the next step.
18)
Offer-up the right-hand side plastics to the assembly. Ensuring that the PSA Cable remains in
place, locate the side plastics on the back tabs. Register the side plastics on the back base
snap hook first, and bring the side plastics onto the front tabs, finally clipping the side in
place on the front base snap hooks as shown in
Figure 10.