Pipishell PIMT4 Installation Instructions Manual Download Page 3

1

Wall plate

01

x1

x1

Right TV 

Bracket

03

02

x1

Left TV 

Bracket

Supplied Parts

Tools Needed (Not lncluded)

Stud Finder

Tape Measure

Pencil

Drill

5mm

Wood Drill

10mm

Concrete Drill

1/2 in.(13mm)

Socket Wrench

Screw Driver

Hammer

 IMPORTANT SAFETY INFORMATION

•Check package contents against Supplied Parts and Hardware Lists to assure that all 
components were received undamaged. Do not use damaged or defective parts. lf you 
require replacement parts, contact customer service at [email protected]
•Not all parts and hardware included will be used. 

•Carefully read all instructions before attempting installation. If you do not understand 

the instructions or have any concerns or questions, please contact customer service at 
[email protected]
•This product may contain moving parts. Use with caution.
•Do not use this product for any purpose or in any configuration not explicitly specified in 

this instruction. We hereby disclaim any liability for injury or damage arising from 

incorrect assembly, incorrect mounting, or incorrect use of this product.
•DO NOT INSTALL INTO DRYWALL ALONE.

Level

Summary of Contents for PIMT4













Reviews: