UNPACKING, SETUP AND SPECIFICATIONS
The NCO-2H is shipped in heavy-duty corrugated cardboard cartons. Inspect the carton
and the equipment for any damage that may have occurred in shipping. Notify the carrier
if damage is discovered before or after unpacking the unit. It is your responsibility to file
any freight claim.
Assembly
The NCO-2H oven comes completely assembled with the exception of the two wire bake
racks. Place one wire rack over each set of elements in the oven. The bent side of the
rack should be toward the front of the oven pointing down.
• Carefully remove carton or crate from unit. Remove all loose packing materials,
making sure that no small parts or accessories are lost. Inspect the unit for concealed
damage before discarding packing materials.
• It is the responsibility of the installer to comply with all local codes.
• Check unit nameplate for electrical requirements. Make sure that the thermostat is
set to the “OFF” position. Connect the plug to a properly sized power source of the
correct voltage.
• Installation is now complete.
WARNING!!!!
DO NOT USE EXTENSION CORDS (VOIDS WARRANTY)
Ground:
The electrical outlet must be provided with an efficient ground, and the voltage and the
frequency of the electrical line matches those indicated on the data plate.
If unsure about the efficiency of the ground, have your electrical circuit
checked by a qualified technician.
NCO-2H Specifications
Model
Volts
Phase
Wire**
Amps
Watts
Hertz
Height
Width
Depth
NCO-2H
120
1
2
15
1800
50/60
21”
28”
17”
4” between shelves
Maximum Oven Temp 400°
** Number of wires does not include ground.
3