PAGE 3
Feb 28/07
8C17
91-10-00
PIPER AIRCRAFT, INC.
PA-46-350P, MALIBU MIRAGE
MAINTENANCE MANUAL
C.
Gap Conditions Between Parts Attached with Threaded Fasteners
If a gap condition exists between mating parts where a threaded fastener is to be installed, install
fasteners and associated hardware per subject chapter/section or to buildup noted during removal.
Then, torque to a value 10% of the final torque required plus the friction drag torque.
For example, if Chart 2, Sheet 2, torque is 190 in.-lbs. and the friction drag torque of the nut is 80
in.-lbs. (i.e. - Chart 2, Sheet 2, torque minus Chart 2, Sheet 1, torque), torque to a value of:
Maximum Permissible
Gap Closing Torque
=
(Chart 2, Sheet 1, torque x .10) + (Sheet 2 - Sheet 1) torque
Example:
3/8-24 (190 x .10) + (270-190) = 19 + 80 = 99 in.-lbs.
Accomplish this for all fasteners common to the gapped interface. If no gap exists after
accomplishing the above, finish torquing to final torque. If a gap remains consult your Piper Dealer’s
Service Advisor (DSA) for further assistance.
D.
After the final torque, apply a slippage mark to the nut or bolt or screw head as applicable.
NOTE: For more details on torquing, refer to FAA AC 43.13-1, latest revision.
2.
Conversion Tables
The following charts contain various conversion data that may be useful when figuring capacities,
lengths, temperatures, and various weights and measures from the English system to the metric system
or back again:
Chart 3, Torque Conversion
Chart 4, Decimal Conversions
Chart 5, Temperature Conversion
Chart 6, Weights and Measures Conversion
Chart 7, Metric Conversion
Chart 8, Drill Sizes
3.
Hose Specifications
4.
Consumable Materials
5.
Vendor Contact Information
6.
Electrical Wire Coding
7.
Electrical Symbols
Summary of Contents for Malibu Mirage PA-46-350P
