-9-
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
„TOO HOT“
The temperture measured by the PCB has
reached a maximum. In this case the power
output will be locked automatically to avoid
heat damage.
Avoid any usage of the device for not less
than 10 minutes! If the error message
appears frequently during normal use
check the power
[W]
and temperature
[C
│
F]
settings as well as the coil resistance
[Ω]
! Extreme setups at the upper power
range can cause intense heating of the
atomizer and PCB. Therefore, avoid
permanently using such setups!
Specifications
Output Power
1,0 - 75,0 W
Output Voltage
0,2 - 6,2 V
Output Current
(max. continuous)
30,0 A
Output Current
(max. instantaneous)
40,0 A
Resistance atomizer/coil
(temperature controll, cold)
see fig.
Resistance atomizer/coil
(power controll, TC=0)
see fig.
Temperature controll 200 - 600° F
100 - 300 °C
Input Voltage
3,0 - 4,2 V
Input Current
5,0 - 28,0 A
Input Current
(max. instantaneous)
32,0 A
Power consumption
(Display 100%)
26 mA
Power consumption
(Standby)
7 mA
Efficiency 85%
80
70
60
50
40
30
20
10
Temperature controll, cold
Power controll, TC=0
Wa
tt
ag
e
/ W
Resistance / Ω
