Pionetics LINX 140T, Owner'S Manual, Page: 11 / 23

Consumer Install 12.16.2016 11
NOTE: After removing the front blue panel and the two blue lid covers, the lid drivers and the two
front panel black buttons are now visible. These parts will be addressed later.
(See Figure 4 to
identify these parts and location.)
6. Locate the sediment filter and carbon filter
(see Figure 5 below)
. They will be found inside their respective filter housings.
Remove the plastic around the filters and return the filters into their respective filter housings. The Sediment Filter can be
inserted into the housing in either direction, but the Carbon Filter needs to be inserted with its black O-Ring (Gasket)
visible to the outside of the Filter Housing.
7. Locate the additional Rubber O-Rings in a small plastic bag provided in your
LINX Kit
(See Figure 6 to identify these parts.)
8.
Slide each one of these O-Rings around the thread of the Filter Housings
exactly as pictured below (See Figure 7)
. Apply Vasaline to the outside of both
of the the O-Rings.
Figure 4
Figure 5
Figure 6
Figure 7