Page 16
Wiring Figure
Wiring
NOTE:
Refer to the following figures for proper wiring between the outdoor unit and indoor units.
Run the main power cord through the lower line-outlet of the cord clamp.
CAUTION
Plug the connective cables to the corresponding terminals, as shown, with their matching numbers
on the terminal block of the indoor and outdoor units. For example, in the US models shown in the
following diagram, Terminal (A) of the outdoor unit must connect with Terminal (A) on the
indoor unit, through the same colored wire lead, without any inversions along the way.
Two-Zone (Dual-Split) models:
Model A
(Newest)
Model B
(Some older models might utilize B, C, or D Model wiring)
Model C
Model D
Magnetic ring (optional part, sold separately)
(Used to hitch onto the connective cable of indoor
and outdoor units after installation.)
1A 2A 3A 1B 2B 3B
1A 2A 3A 1B 2B 3B
