Pioneer XV-GX3 Service Manual Download Page 70

Page: 70 / 96

XV-GX3

7.1.6 SERVICE TEST MODE

1. Conditions During Service Test Mode

• During Service Test mode, the unit will not be shut down for an emergency even if one of the failures mentioned below

occurs.

• After the unit has been shut down in Normal mode for an emergency upon detection of one of the failures mentioned below,

you can turn it on immediately, without waiting for one minute, in Service Test mode.

• The accumulated power-on time can be checked during Service Test mode.

2. How to enter Service Test mode

• Connect AC power cord with the STEST port (microcomputer terminal IC5501: 43-pin) at High (5 V). (See "Service Test

mode connecting point".)

Note:

Initial function setting is DVD/CD.

• Connect AC power cord while holding both the

and POWER keys on the main unit pressed. The unit will be turned on,

and the following indication will be displayed:

3. How to quit Service Test mode, and conditions for quitting

• To quit Service Test mode, turn the power off or disconnect the AC power cord to turn the power off.
• When Service Test mode is quit, only data on protection in RAM will be initialized, and data on user settings in RAM will not

be initialized.

4. Indications on the FL display when Service Test mode is entered

• Indications on the FL display when Service Test mode is entered differ depending on whether the unit was turned off

normally or shut down for emergency protection, immediately before Service Test mode starts, as follows:

5. Operations during Service Test Mode

• Basically, operations in Service Test mode are the same as in Normal mode. However, to indicate that the unit is in

Service Test mode, the following are displayed when the functions are changed:

W e l c o m e

[After a normal power-off]

FL display

V o l

FL display

R V C

FL display

[After a shutdown caused by an EEPROM (IC5401) failure]

R V C

E E P

E R R

FL display

V o l

FL display

P R T C T

W G

FL display

DVD/CD

TUNER

TAPE

[After a shutdown caused by an AMP-system abnormality]

V o l

R V C

P R T C T

E R

FL display

[After a shutdown caused by an AMP-system failure]

V o l

R V C

D V

P R T C T

FL display

[After a shutdown caused by a DVD-system failure]

[Functions]

[FL display]

LINE

Summary of Contents for XV-GX3

































































































Search results

Summary of Contents for XV-GX3

Reviews:

Related manuals for XV-GX3

Brands by name

Popular brands

Pioneer XV-GX3, Service Manual

Search results

Summary of Contents for XV-GX3

Reviews:

Related manuals for XV-GX3

Brands by name

Popular brands