114
1
2
4
1
2
4
C
D
F
A
B
E
XV-DV430
Note:
For performing the diagnosis shown below, the following jig cables for service are required:
• GGD1266 (
×
2)
• GGD1222
• GGD1160
1
Remove the bonnet by removing the seven screws.
2
Press the STANDBY/ON button to turn on the power.
3
Press the
0
OPEN/CLOSE button to open the tray.
4
Remove the tray panel.
5
Press the
0
OPEN/CLOSE button to close the tray.
6
Press the STANDBY/ON button to turn off the power.
Bonnet and Tray panel
1
1
Set the test disc.
2
Press the
0
OPEN/CLOSE button to close the tray.
(The test disc is clamped.)
3
Press the STANDBY/ON button to turn off the power.
4
Pull out the power cord from the outlet
Test disc set
2
3
5
2
4
2 6
3
2
3
5
Tray panel
Tray
Tray
Test disc
1
How to open the Tray when the power cannot be on
Slit
Drive gear
Loading Mecha. Assy
Screwdriver (small)
Insert a screwdriver (small) into the slit located at the bottom of
the unit, and slide the projection of the drive gear in the Loading
Mecha. Assy in the direction of the arrow, as indicated in the
photo. If the Tray pops out a little, fully pull it out by a hand.
7.1.12 DISASSEMBLY
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
