Pioneer XV-DV303, Service Manual

Page: 84 / 122

84
1 2 3 4
1 2 3 4
C
D
F
A
B
E
XV-DV303
7.1.2 DISPLAY OF THE MECHANISM ERROR HISTORY
Indication contents
• Table of Error Code • Table of Servo State
1 2
3
When mechanism error (FE error) occurred, the mechanism
error history of maximum past eight times is displayed by
pressing the CHP/TIM key during service mode screen
display.
Indication displayed in the screen upper part is new error.
• Indication contents
1
Error code
Two characters in the front represent the Error Code and
two characters in the back represent the Servo State.
The detail is as follows.
3
Error contents indication
Indicate the error contents which occurred with
character.
Examples: When Error code is 0x13 (Focus lost timeout)
and error state is 0x05 (Disc judge),
"Focus lost timeout in Disc judge"
∗
Movement in the error occurrence: open the tray when
SERVO STATE is Disc Judg, and others stop.
However, error code is exception in the device error of
0xd
∗
.
2
Error occurrence time
Error indicates the time which occurred after system
turned on the power supply.
∗
When time of new error is short, it becomes assumed
power off once.
Error Code
Servo State
1 2
3
0x00 Reset
0x01 Stop (inside position)
0x02 Stop (any position)
0x03 Braking for stop
0x04 New disc
0x05 Disc judge
0x06 Reserved 1
0x07 Playing
0x08 Start up
0x09 Seeking
0x0A Pausing
0x0B Reading BCA
0x0C Reserved 2
0x0D
0x0E
0x0F
FOCUS ERROR 0x0
∗
FOCUS TIMEOUT 0x1
∗
Focus on error 0x01 Focus on timeout 0x11
Focus off error 0x02 Focus off timeout 0x12
Focus lost error 0x03 Focus lost timeout 0x13
Focus balance adjust error 0x04 Focus balance adjust timeout 0x14
Focus gain adjust error 0x05 Focus gain adjust timeout 0x15
Focus sweep error 0x06 Focus sweep timeout 0x16
Focus reflection error 0x07 Focus reflection timeout 0x17
TRACKING ERROR 0x2
∗
TRACKING TIMEOUT 0x3
∗
Tracking on error 0x21 Tracking on timeout 0x31
Tracking off error 0x22 Tracking off timeout 0x32
Tracking lost error 0x23 Tracking lost timeout 0x33
Tracking balance adjust error 0x24 Tracking balance adjust timeout 0x34
Tracking gain adjust error 0x25 Tracking gain adjust timeout 0x35
Tracking jump error 0x26 Tracking jump timeout 0x36
STEPPING ERROR 0x4
∗
STEPPING TIMEOUT 0x5
∗
Stepping on error 0x41 Stepping on timeout 0x51
Stepping off error 0x42 Stepping off timeout 0x52
Stepping lost error 0x43 Stepping lost timeout 0x53
Stepping move error 0x44 Stepping move timeout 0x54
SPINDLE ERROR 0x6
∗
SPINDLE TIMEOUT 0x7
∗
Spindle on error 0x61 Spindle on timeout 0x71
Spindle off error 0x62 Spindle off timeout 0x72
Spindle lost error 0x63 Spindle lost timeout 0x73
Spindle CAV error 0x64 Spindle CAV timeout 0x74
Spindle CLV error 0x65 Spindle CLV timeout 0x75
ACQUISITION ERROR 0x8
∗
ACQUISITION TIMEOUT 0x9
∗
PLL lost error 0x83 PLL lost timeout 0x93
DECODER ERROR 0xa
∗
DECODER TIMEOUT 0xb
∗
ID lost error 0xa3 ID lost timeout 0xb3
FAIL SAFE 0xe
∗
unexpected error 0xe1
DEVICE ERROR 0xd
∗
SRAM error 0xd1