XR-MR7
90
[Procedure]
(1) Press the "DIGITAL SYNCHRO" button in Stop mode.
Note: Make sure the unit is in Stop mode.
(2) Check that "SYNC" appears on the FL display.
(3) Press the "AUTO/MANUAL" button so that "04 34" appears on the FL display.
(4) Press the "FINALIZE" button for focus-in.
(5) Press the "PLAY" button for CAV-servo spindle kick.
(6) Press the "PAUSE" button to close the tracking servo, then set the unit to Playback mode.
(7) Adjust with the "RECORD" button and "REC MUTE" button until the above adjustment value to be reached is obtained.
Press the "SET" button to register the adjustment. Once the adjustment is registered with the "(SKIP ID)SET" button, "D.VOL" on the FL
display will disappear.
(8) Press the "STOP" button to stop the unit.
Note: Adjustment must be done around mid-radius on a disc.
6.5.4 Focus Bias Adjustment
CN102 - pin 1 (RF)
Test Point
Adjustment Point
Adjustment Value
RECORD button and REC MUTE button
Adjust until RF jitter is minimal or that the eye pattern of the RF waveform is most open.
Jitter Meter
10:1 probe
or
10 : 1
Oscilloscope
RF
VC
Symptom when out of
adjustment
Sound broken, record characteristics deteriorate
STD-903
Test Disc
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
