Pioneer X-HM26, Operating Instructions Manual

Page: 5 / 40

The Safety of Your Ears is in Your
Hands
Get the most out of your equipment by playing
it at a safe level – a level that lets the sound
come through clearly without annoying blaring
or distortion and, most importantly, without
affecting your sensitive hearing. Sound can be
deceiving. Over time, your hearing “comfort
level” adapts to higher volumes of sound, so
what sounds “normal” can actually be loud and
harmful to your hearing. Guard against this by
setting your equipment at a safe level BEFORE
your hearing adapts.
WARNING: Handling the cord on this product or
cords associated with accessories sold with the
product may expose you to chemicals listed on
proposition 65 known to the State of California and
other governmental entities to cause cancer and
birth defect or other reproductive harm.
Wash hands after handling.
D36-P5_B1_En
ESTABLISH A SAFE LEVEL:
• Set your volume control at a low setting.
• Slowly increase the sound until you can hear
it comfortably and clearly, without distortion.
• Once you have established a comfortable
sound level, set the dial and leave it there.
BE SURE TO OBSERVE THE
FOLLOWING GUIDELINES:
• Do not turn up the volume so high that you
can’t hear what’s around you.
• Use caution or temporarily discontinue use in
potentially hazardous situations.
• Do not use headphones while operating a
motorized vehicle; the use of headphones
may create a traffic hazard and is illegal in
many areas.
S001a_A1_En
IMPORTANT NOTICE
THE MODEL NUMBER AND SERIAL NUMBER
OF THIS EQUIPMENT ARE ON THE REAR
OR BOTTOM.
RECORD THESE NUMBERS ON YOUR
ENCLOSED WARRANTY CARD AND KEEP IN
A SAFE PLACE FOR FUTURE REFERENCE.
X‑HM22̲SYXE8̲En.book 5 ページ ２０１６年５月２０日 金曜日 午後１０時５５分