Disc playback
05
17
En
English
Français
Español
Basic operations
Advanced CD or MP3 disc playback
Repeat play
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press
repeatedly until “REPEAT ONE” appears. Press
ENTER
.
To repeat all tracks:
Press
repeatedly until “REPEAT ALL” appears. Press
ENTER
.
To repeat desired tracks:
Perform steps 1 - 5 in “
Programmed play (CD)
” section
(page 18) and then press
repeatedly until “REPEAT
ALL” appears. Press
ENTER
.
To cancel repeat play:
Press
repeatedly until “REPEAT OFF” appears. Press
ENTER
.
Note
• After performing repeat play, be sure to press
∫
.
Otherwise, the disc will play continuously.
• During repeat play, random play is not possible.
Random play
The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Press
RANDOM
repeatedly until “RANDOM ON” appears.
Press
ENTER
.
To cancel random play:
Press
RANDOM
repeatedly until “RANDOM OFF” appears.
Press
ENTER
.
Note
• If you press the
9
during random play, you can move
to the track selected next by the random operation.
• In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
• During random play, repeat play is not possible.
Function
Main unit Remote
control
Operation
Play
Press in the stop mode.
Stop
Press in the playback mode.
(when playing a CD)
“RESUME” is displayed
and the place where you
stopped play is
memorized. Press again
and the memorized
position is cleared.
Pause
Press in the playback mode.
Press
1;
to resume
playback from the paused
point.
Track up/
down
Press in the playback or
stop mode.
If you press the button in the
stop mode, press
1;
to
start the desired track.
(when playing MP3)
You can only skip forward
or back to music files
inside the same folder.
Fast
forward/
reverse
Press and hold down in the
playback mode.
Release the button to
resume playback.
SN29402593_X-CM56&56D_En.book 17 ページ ２０１６年５月２７日 金曜日 午後３時４７分
