Pioneer X-CM52BT, Operating Instruction

Page: 29 / 92

Using the tuner 08
29
En
English
To recall a memorised station
1 Press /– to select the desired
station.
To scan the preset stations
The stations saved in the memory can be scanned
automatically. (Preset memory scan)
1 Press and hold /–.
The preset number will appear and the programmed stations
will be tuned in sequentially, for 5 seconds each.
2 Press /– again when the desired
station is located.
To erase entire preset memory
1 Press TUNER on the remote control.
2 Press CLEAR until “MEM CLR” appears.
Note
• All stations will be erased.
X-CM52_LXE_En.book 29 ページ ２０１４年３月２８日 金曜日 午前１０時３９分