Advanced Setup | Firmware Update | Others
0
Default values vary depending on the regions.
0
Distance units can be switched by pressing MODE on the remote controller. When the
unit is set as feet, you can set between 0.1 ft and 30.0 ft in increments of 0.1ft. When the
unit is set as meters, you can set between 0.03 m and 9.00 m in increments of 0.03 m.
■
Channel Level
Front Left
Select a value between "-12 dB" and "+12 dB" (in 1 dB
increments). A test tone will be output each time you change the
value. Select the desired level (Default Value is "0 dB").
Center
Select a value between "-12 dB" and "+12 dB" (in 1 dB
increments). A test tone will be output each time you change the
value. Select the desired level (Default Value is "0 dB").
Front Right
Select a value between "-12 dB" and "+12 dB" (in 1 dB
increments). A test tone will be output each time you change the
value. Select the desired level (Default Value is "0 dB").
Surround Right
Select a value between "-12 dB" and "+12 dB" (in 1 dB
increments). A test tone will be output each time you change the
value. Select the desired level (Default Value is "0 dB").
45
Surround Left
Select a value between "-12 dB" and "+12 dB" (in 1 dB
increments). A test tone will be output each time you change the
value. Select the desired level (Default Value is "0 dB").
Subwoofer
Select a value between "-15 dB" and "+12 dB" (in 1 dB
increments). A test tone will be output each time you change the
value. Select the desired level (Default Value is "0 dB").
Front Left
Specify the distance between each speaker and the listening
position. (Default Value is "10.0ft/3.00m")
Center
Specify the distance between each speaker and the listening
position. (Default Value is "10.0ft/3.00m")
Front Right
Specify the distance between each speaker and the listening
position. (Default Value is "10.0ft/3.00m")
Surround Right
Specify the distance between each speaker and the listening
position. (Default Value is "10.0ft/3.00m")
Surround Left
Specify the distance between each speaker and the listening
position. (Default Value is "10.0ft/3.00m")
Subwoofer
Specify the distance between each speaker and the listening
position. (Default Value is "10.0ft/3.00m")
E
N
