Controls and displays
01
6
En
01
Chapter 1:
Controls and displays
Front panel
1
STANDBY/ON
2
PHONES jack
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers. The
listening mode when the sound is heard from the headphone
can be selected only from
PHONES SURR
,
STEREO
or
STEREO ALC
mode (
S.R AIR
mode can be also selected with
ADAPTER
input).
3
PORTABLE/MCACC SETUP MIC jack
Use to connect an auxiliary component using a stereo mini-
jack cable (page 15) or connect a microphone when
performing Auto MCACC setup (page 16).
4
Remote sensor
Receives the signals from the remote control (see
Operating
range of remote control
on page 8).
5
Character display
See
Display
on page 6.
6
MCACC indicator
Lights when Acoustic Calibration EQ (page 25) is on
(Acoustic Calibration EQ is automatically set to on after the
Auto MCACC setup (page 16)).
7
HDMI indicator
Blinks when connecting an HDMI-equipped component;
lights when the component is connected (page 13).
8
INPUT SELECTOR
Selects an input source (page 18).
9
SOUND RETRIEVER
Press to restore CD quality sound to compressed audio
sources (page 24).
10 MASTER VOLUME dial
Display
11 Dolby Digital indicators
2
D
– Lights when a Dolby Digital encoded signal is
detected.
2
TrueHD
– Lights when a source with Dolby TrueHD
encoded audio signals is detected.
2
D+
– Lights when a source with Dolby Digital Plus
encoded audio signals is detected.
EX
– Lights to indicate Dolby Digital EX decoding.
PLII(x/z)
– Lights to indicate
2
Pro Logic II/
2
Pro Logic
IIx or
2
Pro Logic IIz decoding (see
Listening in surround
sound
on page 22 for more on this).
12 DTS indicators
DTS
– Lights when a source with DTS encoded audio
signals is detected.
HD
– Lights when a source with DTS-EXPRESS or DTS-
HD encoded audio signals is detected.
ES
– Lights to indicate DTS-ES decoding.
96/24
– Lights when a source with DTS 96/24 encoded
audio signals is detected.
13 Listening mode indicators
AT
– Lights when the Auto Surround feature is switched
on (page 22).
DIR
– Lights when the
DIRECT
or
PURE DIR
mode is
switched on (page 23).
14 Audio signal indicators
D
– Lights when a digital audio input is selected. Blinks
when a digital audio input is selected and selected audio
input is not provided.
HDMI
– Lights when an HDMI input is selected. Blinks
when an HDMI input is selected and selected HDMI
signal is not provided.
15 Character display
Displays various system information, the preset number of
the tuner or the input signal type, etc.
16 Sleep timer (
) indicator
Lights when the receiver is in sleep mode (page 7).
MASTER
VOLUME
AUDIO/ VIDEO MULTI- CHANNEL RECEIVER
VSX-S300
PORTABLE /
MCACC SETUP MIC
PHONES
STANDBY / ON
MCACC
HDMI
SOUND
RETRIEVER
INPUT SELECTOR
1
2
3
4
5
6 7
8 9
10
11
12
14
15
16
13
13
VSX-S300_SYXCN_En.book 6 ページ ２０１１年４月８日 金曜日 午後８時１０分
