10
VSX-LX52
1
2
3
4
A
B
C
D
E
F
1
2
3
4
[3] Rear panel
CAUTION
Before making or changing the connections, switch
•
off the power and disconnect the power cord from the
power outlet. Plugging in should be the fi nal step.
To avoid hum, do not lay connected cables over the
•
top of the receiver.
1 HDMI connectors (x6)
Multiple inputs and two outputs for high-quality audio/
video connection to compatible HDMI devices.
2 Coaxial digital audio inputs (x2)
Use for digital audio sources, including D
V
D players/
recorders, digital satellite receivers, CD players, etc.
3 Optical digital audio output/input(s) (x4)
Use the
OUT
jack for recording to a CD or MiniDisc
recorder.
Use the
IN
jacks for digital audio sources, including D
V
D
players/recorders, digital satellite receivers, CD players,
etc.
4 Component video connectors input(s)/output (x3)
Use the inputs to connect any video source that has
component video output, such as a D
V
D player.
Use the output to connect monitor or T
V
.
5 MULTI-ZONE audio/video outputs
Use to connect a second or third amplifi er and monitors
or T
V
s in a separate room.
6 Composite and S-Video monitor outputs
Use to connect monitors and T
V
s.
7 Audio/video source inputs/(outputs) (x5)
Use for connection to audio/visual sources, such as D
V
D
players/recorders,
V
CRs, etc. Each set of inputs has jacks
for composite video, S-
V
ideo and stereo analog audio.
8 Stereo analog audio source inputs/(outputs) (x3)
Use for connection to audio sources such as CD players,
tape decks, turntables, etc.
9 Multichannel analog audio inputs
5.1 channel inputs for connection to a D
V
D player with
multichannel analog outputs.
10 Multichannel pre-amplifi er outputs
Use to connect separate amplifi ers for front, center,
surround, surround back and subwoofer channels.
11 AM and FM antenna terminals
Use to connect indoor or outdoor antennas for radio
broadcasts.
12 RS-232C connector
Use for connection to a PC for graphical output when
using Advanced MCACC.
13 Control input/output
Use to connect other Pioneer components so that you
can control all your equipment from a single IR remote
sensor.
14 Remote inputs/output
Use for connection to an external remote control sensor
for use in a MULTI-ZO
N
E setup, for example.
15 12 V trigger jacks
(total 50 mA max.)
(x2)
Use to switch components in your system on and off
according to the input function of the receiver.
16 Speaker terminals
Use for connection to the main front, center, surround
and surround back speakers.
17 AC power inlet
Connect the supplied power cord here.
